Um fio condutor, curvado na forma de um semicírculo de raio R, forma um circuito fechado e é percorrido por uma corrente I. O circuito está no plano xy e um campo magnético uniforme B está aplicado paralelamente ao eixo y, com é visto na figura.
a) Determine a força magnética total (vetor) sobre as parte retilínea do condutor.
b) Determine as força magnética total (vetor) sobre as parte curva do condutor
c) Determine o vetor torque exercido por B sobre o circuito.
Gbaritos: a) R: F=2IBRk b) R: F=-2IBRk c) T=(-I/2)PIR^2Bi
Física III ⇒ Força Magnética Tópico resolvido
Moderador: [ Moderadores TTB ]
Set 2017
06
22:57
Força Magnética
Última edição: caju (Qui 07 Set, 2017 00:41). Total de 2 vezes.
Razão: Arrumar título.
Razão: Arrumar título.
-
- Mensagens: 218
- Registrado em: Seg 26 Jun, 2017 10:29
- Última visita: 07-05-19
Set 2017
07
20:17
Re: Força Magnética
Essa questão exige além dos conhecimentos de eletromagnetismo, saber trabalhar com produto vetorial (assim como a maioria das questões mais aprofundadas de eletromagnetismos). Caso tenha dúvida quanto ao sentido do vetor resultante, aplica a regra da mão direita.
Jack of all trades
Set 2017
13
21:36
Re: Força Magnética
Podemos calcular também pela integral
a)
[tex3]\vec{F}=\int I.d\vec{L}\times\vec{B}[/tex3]
[tex3]\vec{L}=x.\hat{i}[/tex3]
[tex3]d\vec{L}=dx.\hat{i}[/tex3]
[tex3]\vec{F}=\int_{-R}^{R}I.(\hat{i}\times B\hat{j})dx[/tex3]
[tex3]\vec{F}=IB\hat{k}\int_{-R}^{R}dx[/tex3]
[tex3]\vec{F}=2IBR.\hat{k}[/tex3]
b)
[tex3]\vec{L}=R.\cos\theta.\hat{i}+R.\sen\theta.\hat{j}[/tex3]
[tex3]d\vec{L}=(-R.\sen\theta.\hat{i}+R.\cos\theta.\hat{j})d\theta[/tex3]
[tex3]\vec{F}=\int_{o}^{\pi}I.d\vec{L}\times\vec{B}[/tex3]
[tex3]\vec{F}=\int_{o}^{\pi}I(-R.\sen\theta.\hat{i}+R.\cos\theta.\hat{j})\times B.\hat{j}.d\theta[/tex3]
[tex3]\vec{F}=\int_{o}^{\pi}I(-BR.\sen\theta.\hat{k}).d\theta[/tex3]
[tex3]\vec{F}=-IBR.\hat{k}\int_{o}^{\pi}\sen\theta.d\theta[/tex3]
[tex3]\vec{F}=-2IBR.\hat{k}[/tex3]
c)
[tex3]\vec{\tau}=\vec{F}\times\vec{r}[/tex3]
[tex3]\vec{\tau}=\int I.(d\vec{L}\times\vec{B})\times \vec{r}[/tex3]
onde r é o vetor posição da força
no caso do trecho retilineo
[tex3]\vec{r}=x.\hat{i}[/tex3]
e do trecho curvilineo
[tex3]\vec{r}=R.\cos\theta.\hat{i}+R.\sen\theta.\hat{j}[/tex3]
[tex3]\vec{\tau}=\int_{o}^{\pi}I(-R.\sen\theta.\hat{i}+R.\cos\theta.\hat{j})\times B.\hat{j}.\times.(R\cos\theta.\hat{i}+R\sen\theta.\hat{j})d\theta+\int_{-R}^{R}I.(\hat{i}\times B\hat{j})\times x\hat{i}.dx[/tex3]
[tex3]\vec{\tau}=IBR^2\int_{o}^{\pi}(-\sen\theta.\hat{k})\times(\cos\theta.\hat{i}+\sen\theta.\hat{j})d\theta+IB\int_{-R}^{R}\hat{k}\times x\hat{i}.dx[/tex3]
[tex3]\vec{\tau}=IBR^2\int_{o}^{\pi}-\sen\theta.cos\theta\hat{j}+\sen^2\theta.\hat{i}.d\theta+IB\int_{-R}^{R} x\hat{j}.dx[/tex3]
[tex3]\vec{\tau}=IBR^2.\int_{o}^{\pi}-\frac{\sen(2\theta)}{2}\hat{j}+\frac{1-\cos(2\theta)}{2}.\hat{i}d\theta+IB.\hat{j}.\int_{-R}^{R} x.dx[/tex3]
[tex3]\vec{\tau}=IBR^2.\frac{\pi}{2}.\hat{i}+\frac{R^2}{2}-\frac{(-R)^2}{2}[/tex3]
[tex3]\vec{\tau}=IBR^2\frac{\pi}{2}.\hat{i}[/tex3]
a)
[tex3]\vec{F}=\int I.d\vec{L}\times\vec{B}[/tex3]
[tex3]\vec{L}=x.\hat{i}[/tex3]
[tex3]d\vec{L}=dx.\hat{i}[/tex3]
[tex3]\vec{F}=\int_{-R}^{R}I.(\hat{i}\times B\hat{j})dx[/tex3]
[tex3]\vec{F}=IB\hat{k}\int_{-R}^{R}dx[/tex3]
[tex3]\vec{F}=2IBR.\hat{k}[/tex3]
b)
[tex3]\vec{L}=R.\cos\theta.\hat{i}+R.\sen\theta.\hat{j}[/tex3]
[tex3]d\vec{L}=(-R.\sen\theta.\hat{i}+R.\cos\theta.\hat{j})d\theta[/tex3]
[tex3]\vec{F}=\int_{o}^{\pi}I.d\vec{L}\times\vec{B}[/tex3]
[tex3]\vec{F}=\int_{o}^{\pi}I(-R.\sen\theta.\hat{i}+R.\cos\theta.\hat{j})\times B.\hat{j}.d\theta[/tex3]
[tex3]\vec{F}=\int_{o}^{\pi}I(-BR.\sen\theta.\hat{k}).d\theta[/tex3]
[tex3]\vec{F}=-IBR.\hat{k}\int_{o}^{\pi}\sen\theta.d\theta[/tex3]
[tex3]\vec{F}=-2IBR.\hat{k}[/tex3]
c)
[tex3]\vec{\tau}=\vec{F}\times\vec{r}[/tex3]
[tex3]\vec{\tau}=\int I.(d\vec{L}\times\vec{B})\times \vec{r}[/tex3]
onde r é o vetor posição da força
no caso do trecho retilineo
[tex3]\vec{r}=x.\hat{i}[/tex3]
e do trecho curvilineo
[tex3]\vec{r}=R.\cos\theta.\hat{i}+R.\sen\theta.\hat{j}[/tex3]
[tex3]\vec{\tau}=\int_{o}^{\pi}I(-R.\sen\theta.\hat{i}+R.\cos\theta.\hat{j})\times B.\hat{j}.\times.(R\cos\theta.\hat{i}+R\sen\theta.\hat{j})d\theta+\int_{-R}^{R}I.(\hat{i}\times B\hat{j})\times x\hat{i}.dx[/tex3]
[tex3]\vec{\tau}=IBR^2\int_{o}^{\pi}(-\sen\theta.\hat{k})\times(\cos\theta.\hat{i}+\sen\theta.\hat{j})d\theta+IB\int_{-R}^{R}\hat{k}\times x\hat{i}.dx[/tex3]
[tex3]\vec{\tau}=IBR^2\int_{o}^{\pi}-\sen\theta.cos\theta\hat{j}+\sen^2\theta.\hat{i}.d\theta+IB\int_{-R}^{R} x\hat{j}.dx[/tex3]
[tex3]\vec{\tau}=IBR^2.\int_{o}^{\pi}-\frac{\sen(2\theta)}{2}\hat{j}+\frac{1-\cos(2\theta)}{2}.\hat{i}d\theta+IB.\hat{j}.\int_{-R}^{R} x.dx[/tex3]
[tex3]\vec{\tau}=IBR^2.\frac{\pi}{2}.\hat{i}+\frac{R^2}{2}-\frac{(-R)^2}{2}[/tex3]
[tex3]\vec{\tau}=IBR^2\frac{\pi}{2}.\hat{i}[/tex3]
Última edição: jedi (Qua 13 Set, 2017 22:02). Total de 2 vezes.
-
- Tópicos Semelhantes
- Respostas
- Exibições
- Última msg